Overview
MorMe Prosthetics has come out with an update to their OG stroker and all I have to say is, THANK GOD. No joke, I felt so bad when I wrote and filmed my review for the original one because I felt like it had so much potential, but all it did was disappoint me. Well, I’m here to tell you that they have completely updated their stroker and I’m super excited to go through all the changes with you. If you haven’t seen the original review and are interested, click here. If you want to see the UPDATED review, click here.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.06.47 PM-1024x674.png)
I have a bunch of videos on my Fansly page of me using this stroker!
I have A LOT of content of me using the Stroker in educational AND explicit ways. As a thank you for being on my review blog, I’m giving you 40% off! Click below to access!
Updates
In this section I will go through the biggest issues I had with the stroker and how they have updated it:
Depth of Hole
Old:
I thought it was really cool that they had 3 different size holes to choose from, only one or two other companies offer that. With each size hole, they also had a different size depth inside. This was such a big problem for me because I like to be able to open up the hole to stick my peen and ligaments in there. This wasn’t possible with the smallest hole since the depth was so small. The medium and large ones were a little better, but still, not great.
Hole Size | Hole Depth |
12mm (.47″) | 40mm (1.5″) |
16mm (.62″) | 50mm (1.9″) |
20mm (.78″) | 60mm (2.3″) |
New:
They still offer 3 different sized holes, but now the depth of each of them is the same size, and it’s really deep. It almost goes all the way up to the tip. They actually created a little chamber
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-11.55.26 AM-1024x803.png)
Suction
Old:
The holes where you put your peen in were too hard to stretch open to actually put your peen in there, which means the suction was non-existant. I could actually stretch the medium and large hole if they did not have the foreskin on it. However, when It would get on my peen, it wouldn’t stay on for long. Because the hole was so shallow and only half of my peen would get in there, there was not much for the stroker to grip onto. This was also a problem when you’re actually jacking off with it, which is, you know, the point of it (lol). I would move it up and down and *pop* it would just come off. Very disappointing.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.25.32 PM.png)
New:
As mentioned above, they have created this little chamber within the depth of the stroker. Your peen isn’t necessarily supposed to go in all the way, but it can. Here is an image demonstrating the chamber. Once your peen is in the stroker, you squeeze the area where the chamber is, this releases any extra air around your peen and helps create a very-close-to vacuum seal. It’s not perfect, but this mechanism has dramatically improved the way the stroker stays on by itself and during masturbation
Durability/Ripping
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/IMG_0028-1024x683.jpg)
Old:
I’m going to be completely honest, the first time I used the medium OG stroker with foreskin, it ripped. I’m so used to being able to stretch out the hole in order to fit my peen and ligaments in there that it was just muscle memory to do it. Well, it ripped and I was so heart broken because I thought I was too rough with it. I messaged the company and they told me its very rare that it happens. I haven’t completely ripped any of the old ones, however, I can see little tears starting to form, because the hole is so hard to open, especially when there is the foreskin sleeve on it.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.28.46 PM.png)
New:
They have now changed the type of silicone shore rating (how soft or hard it will be when it’s cured “dry”). The old stroker was all one density, whereas the new stroker has a softer/squishier bottom (where the hole is), and a harder top (where the head and suction chamber are). Because of this. the hole is now way stretchier does NOT rip when you stretch it out. I’ve used the new one multiple times and I’ve actually tried to be rough with it in order to see the durability and all I have to say is wow. This is a durable stroker. I am absolutely not telling you that stretching it won’t lead to it ripping eventually. However, it seems pretty durable, so always take care of the peen and the peen will take care of you.
Sliding Foreskin
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/02/Use-MorMe-OG-Stroker-2.gif)
Old:
The foreskin sleeve is something you can add to the OG packer in order to actually jack off with foreskin. This was revolutionary for me and something I’ve been waiting for for over 10 years. There are some companies out there that have tried, but nothing truly felt realistic, until MorMe. The stroker has coconut oil in its enclosed sleeve, which you need to warm up in order to get it from a solid to a liquid. Usually just putting it between your legs, or in a bowl of warm water is enough.
Now, the issues with the original foreskin was:
- You could see the seam, it was at the very bottom of the sleeve, but it was not aesthetically pleasing.
- The “skin” was very thin and felt weak. I did end up ripping the original foreskin and I wasn’t even being rough.
- The coconut oil used got harder to “warm up” and lubricate the sleeve to actually do what it’s supposed to do.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Squish-MorMe-OG-Stroker-2.0.gif)
New:
The foreskin actually looks the same but has some minor changes. The silicone used is actually a little more durable.
How the issues have been addressed:
- The seam is now hidden inside the foreskin, making it more aesthetically pleasing.
- The “skin” feels way more durable and I’ve used it a bunch of times and it does not feel like it will rip anytime soon. Even though I have taken it off the stroker and put it on other prosthetics and stretched it. It feels very durable.
- I don’t think they changed the type of coconut oil they used but it seems like it warms up and glides way faster and easier than the older model. This might be because it’s brand new, so this is something I plan on continuing to test out and will post updates on.
Internal Sensation
Old:
The inside of the stroker had little ridges in there that would help hold your peen in but also give you additional sensation. It actually felt very good and was happy about this feature.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.19.50 PM.png)
New:
This is going to be one of those new things I hate about the updated version. I love a stroker with good ridges or bumps on the inside to give the wearer a little extra when wearing it. If I think back to every masturbation sleeve I’ve ever tried, all have had at least some form of ridges. Well, this new version doesn’t? They have completely removed it and I was taken aback. I messaged MorMe for some more information and they let me know that because of the suction chamber, if you want to create a “vacuum-like seal”, the ridges add too much space where air can get trapped, which would completely defeat the purpose of the suction chamber.
I’m going to be honest and say that I’m super convinced of this logic. I would love to have seen what the chamber does with the ridges. Some of the BEST strokers I have ever used have really intense ridges, and they still create AMAZING suction. Take the Short Stroker from Banana Prosthetics for example. Amazing ridges, amazing suction. So in terms of the MorMe Stroker 2.0, This is a huge negative for me and really the only thing I do not like about the new version.
Shaft Seam
Old:
It was clear that the stroker shaft was made and then, depending on what size the customer were order, MorMe would add that to the stroker by gluing it. This created a really obvious looking seam where you could see the glue and it just wasn’t pretty. For me, it took me away from the illusion.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.02.03 PM-1024x758.png)
New:
This is now a one pour silicone mold, which means the hole is now built into it and it’s no longer glued on. This makes it more durable and now there is absolutely no chance of the “insert” hole falling out or ungluing. It also looks better.
![](https://dxw18f.p3cdn1.secureserver.net/wp-content/uploads/2024/06/Screenshot-2024-06-29-at-12.02.12 PM-1024x733.png)
All in all, I’m so glad they listened to feedback and decided to change the stroker. The improved design is so much better and I can actually make videos on my Fansly and OnlyFans using them now, hehe.
Other Fun Stuff
The Joystick from Transthetics is my favorite prosthetic for sex and I’ve always wanted foreskin on it in order to jack it off for solo play. So I thought….. Let me put the new MorMe sleeve on it and see if it works. WELL DOES IT EVER. I felt like I had heart eyes when I put it on and actually was able to jack it off. I did a full Fansly video on this and you can see my genuine reaction and how happy I was. I almost cried.
Something that I thought was interesting was that some cis men messaged me and asked me if they could use the sleeve on their penis because they are circumcised and have always wanted foreskin, or to just try it out. I really hope this is something they expand on because people who have had phalloplasty could also benefit from this!
Final Thoughts
All in all, I’m so glad they listened to feedback and decided to change the stroker. The improved design is so much better and I can actually make videos on my Fansly and OnlyFans using them now, hehe. I love being able to actually use this and masturbate with it. The suction is good enough to have the stroker on your peen and jack off the foreskin. You still have to hold it down a little, but not as much as before, this is a super big win for me. Literally, this company has been innovative since day one. Super happy with who they are as a company overall and what they stand for. Makes me very happy to support good companies! Even ones that are not trans-owned!
I have A LOT of content of me using the NEW stroker in educational AND explicit ways. As a thank you for being on my review blog, I’m giving you 40% off! Click below to access!
Watch my original YouTube review from 2024
Video may be age restricted. You have to click the link and login in order to watch it.